Indoor unit of the heat pump
Compact heat pump with a 200-liter capacity
- Space saving
- 200-liter DHW tank
- Stainless steel tank
- Easy remote control and management
Why choose Thermic Comfort?
Refined Aesthetic Design
With a sophisticated matte black finish and clean lines.
SCOP of 5.0
A SCOP of up to 5.0 ensures high-quality performance and sustainability.
Built-in Wifi
All our Elda Series units include Wi-Fi connectivity.
Natural Refrigerant
“Green” refrigerant R290, environmentally friendly with a very low GWP.
Water Temperature up
to 75°C
The water temperature can be adjusted in the heat pump from 30°C to 75°C.
High Efficiency A+++
The Elda Series meets the highest energy efficiency rating: A+++.
Elda HT: Technology that fits your home
Elda HT is the combination of a Thermic Comfort heat pump as an aerothermal heat generator and a hydraulic tower-type indoor unit designed to simplify installation and integration without compromising comfort or performance. It is the best heat pump solution for homes where space is limited.
The Elda HT hydraulic tower integrates regulation and hydraulic components for three services (heating, domestic hot water, and cooling) in a single unit. It is specially designed to stand out while making installation as simple as possible.
Components of ELDA HT
The selection of materials in its design meets strict criteria of durability, energy efficiency, and thermal resistance, combining hydraulic, thermal, and control components in an optimized structure.
The system includes the following components:
DHW tank (accumulator tank)
Large stainless steel cylinder that stores domestic hot water.
Capacity: 200 liters
Heat Exchanger
Coiled copper and stainless steel tube, either inside or outside the tank.
Allows heat transfer from the refrigerant or the heating circuit water to potable water
Hydraulic Group (circulation pump)
Circulates water through the system to ensure uniform heating and cooling distribution
Expansion Vessel (red)
Pressurized component that compensates for changes in water volume when heated. Prevents overpressure in the closed circuit
Safety valve
Releases pressure if it exceeds a certain threshold to protect the system
Thermal Insulation
Surrounds the tank externally (outside the steel layer) to prevent heat loss
Electronic Board or Control Unit
Located in a closed compartment or on the top/side of the unit. Regulates the operation of the system
Temperature and Pressure Sensors
Monitor and control system conditions to ensure efficient and safe operation
Sensor-Controlled refrigeration circuit
The entire thermal generation process — occurring both in the heat pumps (outdoor units) and the HT indoor unit — is controlled and monitored by sensors. Continuous pressure measurement in the refrigeration, heating, and geothermal circuits, along with phase and defrost control, ensures maximum comfort and operational safety.
This sensor integration allows the refrigeration circuit to be managed without the need for external measuring devices, simplifying maintenance.
Product details
| Water tank capacity | 200 Liters |
| Maximum water outlet Temperature | 75℃ |
| Voltage and Frequency | 220/240 V~ 50Hz |
| Sound level | 31 dB(A) |
| Dimensions (LxWxH) | 640 x 750 x 1950 mm |
| Location | 640 x 750 x 1950 mm |
Product documents
PDF - 185 KB
Download Thermic Home
The Thermic Home app can be used in combination with a Thermic Comfort heating system
connected to the Internet or with the Smart Life communication module. You can request it from your
heating installer.
Download the Thermic Comfort app here:
